A cover made of rubber bands for a phone is a product that every little girl dreams of. After all, you must admit that this beautiful, interesting, and most importantly, completely unique accessory will not go unnoticed among people. Before you start creating this cute accessory, you should learn some of the intricacies of weaving.
Subtleties of work
The cover is a great thing. But how to weave a rubber band phone case in such a way that it would fit a little princess? In fact, there is almost nothing complicated and unusual in this - any child can cope with this goal on his own, unless, of course, he is quite small.
Learning how to make phone cases is not at all difficult, the most important thing here is to have the desire and skills. Pair useful advice- and a delightful unusual accessory in your pocket.
Main inventory
Remember that for such an important matter as weaving, first of all, you need to stock up on great patience. After all, this will take a lot of time - the result of labor will not appear immediately. After all, weaving a product from rubber bands is a rather painstaking task. What is required for work:
Cover weaving methods
Rubber weaving, phone case. There are completely different methods for weaving rubber bands from Rainbow Looms - it all depends on the type of craft and the skills (well, age) of the manufacturer. But if you want to make a case, then there are only two simple and interesting weaving method:
Work on the machine
Many people think about how to weave a phone case out of rubber bands on a loom. With a set of materials, a machine and a little effort, you can create a unique thing. It is not at all difficult to do such a thing on the machine. On the columns of the machine (upper and lower row) is put on each under one eight.
The main goal is to ensure that crosses come out at the output, occupying the entire perimeter of the tool.
Stages of work:
The first lower column and the second upper one will be braided by the first iris. The next one will hook on the second lower peg and throw itself on the first upper one. Then everything is simple - not twisted rubber bands are put on suitable pairs of pegs in the bottom row.
We do the same for the top row. With the help of a hook, the lower rubber bands are pulled together to the center. Then all manipulations are repeated in accordance with the selected length of the product. Remember about technical holes - they are made only with the help of passes.
To complete the work, all loops are removed on the first row - and then on the iris, which is then tightened. This is a completely general scheme, if you want it you can always improve it with some of your personal preferences - for example, apply different variants the colors of rubber bands, weave patterns and ornaments, you can even create letters - in a word, use everything that your imagination allows you to do, without restrictions.
Crochet phone case
Of course, at first, it may seem that making a phone or tablet case from rubber bands with a hook is much more difficult and time consuming. In fact, this is not at all the case - both methods have their pros and cons.
To work with a crochet, you need to acquire exactly the tool itself - a crochet hook. Then everything is simple - weaving passes by the "chain" method.
Keep in mind, however, that a chain link is about 1cm long, so it's pretty easy to figure out exactly how long the item is and how many elastic bands you need. First you need to take the first elastic band, fold it into a figure eight and put it on the hook - this is how the first loop will turn out.
Next, you need to take the next part and thread it through a double loop - you get four loops already. The last two loops are always pulled through the new irises and back onto the hook. Thus, we will get the whole cover - beautiful and interesting. If you make such a product a couple of times, then everything will start to turn out automatically.
Attention, only TODAY!
Rubber bands for weaving gained great fame. They are most in demand among the younger generation. You can knit different baubles from rubber bands on a special machine, or a slingshot, using a hook. The advantage of such sets lies in their practicality, you can make any thing, even a small toy or some key chain in the shape of a deer, even weave a whole backpack. To make a figure out of rubber bands, it is enough to study a couple simple ways weaving and purchase the right materials. Weaving is an easy and interesting activity. Silicone handle bracelets are becoming well-known among the younger generation. A very popular pattern for weaving a bracelet on a slingshot is an arrow of love. You can make such bracelets in pairs to wear together.
To weave a bracelet you need:
- plastic hook;
- multi-colored rubber bands;
- S-shaped clip.
Such materials can be purchased at absolutely every embroidery store, the advantage of such a bracelet will be low costs which is important for a beginner.
First step to start - choose colors from which we will weave a bracelet, for example, green and blue. We connect the elastic in the center and pull on a clip. We put the tip first in one pass, and after the other. The clip must be in the middle and swing easily.
After that, take two blue elastic bands and pull them on the hook, placing them at the end. We weave the same from other colors, continuing to weave a bracelet of the length you need. To complete the bracelet, you need to put the last purple elastic on the hook, stretch it below, and remove it on the elastic. Now you need to thread the purple through the bends into the free clip. The decoration for your hand is ready.
Unusual "scandal" scheme
Weave a bracelet called "scandal". To create it you need:
- hook;
- rubber bands of two colors in a ratio of 40 to 32 (for example, red and blue);
- S-shaped clip.
This set differs from the standard one only by the obligatory use of exactly two colors.
First, we will repeat the same 5 steps as in the scheme of our first bracelet. When we have four bends left, we need to remove the leftmost one. We extend the green elastic band down, stretching the yellow ring through it. We fix the product by hand. Now we pull back the yellow elastic band (which we removed from the hook) and only then the green one. Holding the loops with your hand so that the bracelet does not disperse, removing them from the hook.
We introduce the hook from the back. Putting green on the hook, we remove the first 3 elastic bands. We stretch the remaining green gum. Supporting the loop with your hand so that the bracelet does not come loose, we remove them all. After that, install the hook on the back side. We fasten the black rubber band on the hook and remove the first 3 rings from it. We stretch the remaining black gum. Now it remains only to put on two yellow ones and thread through the loops, introducing the hook into the remaining yellow loops. According to this principle, we weave the required length.
And there is also knitting through the so-called magic ring. This type involves knitting through rings, initially the circle is 6 loops. To start knitting, you need to unscrew the ring 3 times. After that, you should touch the elastic band with the end of the hook, and hold the back side with your hand. Then we rearrange the wound elastic band to the second stretched elastic band. The point that is held by hand must be put on the hook, as a result, 2 loops appear. The leftmost elastic band must be passed through the right one, forming a bundle.
We stick the hook from which we wound at the beginning of knitting into the loop. We insert the second gum in the same way as last time. Under the rest we stretch the leftmost elastic band. It turns out the first loop of the ring. Repeat this procedure until 6 loops come out. It should be noted that in any case, 1 loop should remain on the hook, you need to put on the clip again. So we can understand that the series is over. This is the ring, you can combine, reduce or increase the size. Everything depends on your imagination.
Weave a phone case
Unusual and bright case, the coloring depends only on you, do you want to weave with stars? No problem! For such a cover, we need approximately 900 rubber bands of different colors. For comfortable knitting, provide yourself with a plan, you can draw at least on any paper format. This will help not to get confused in such a voluminous matter.
So, knitting will be built on the so-called chain. Link by link in 1-2 cm, immediately calculate the dimensions of the phone, for an accurate calculation of the number of rubber bands. The construction of the chain begins with putting the first elastic band folded into a figure eight on the hook. The next element goes through the already double loop, getting four loops. The outer loops pass through new elastic bands throughout the process, returning each time to the beginning. It was the whole knitting algorithm. The process is long and hard, but the result will delight you every day.
Why is weaving useful?
Improving your knitting skill, you can not only please yourself and those around you with toys and figures that are easy to make. Perhaps you will have a unique opportunity to make money on weaving by selling more and more complex and practical products. Good luck with your creativity!
Weaving the Scandal bracelet in stages will help the lessons in the training video.
A fascinating and useful activity is weaving from rubber bands. For many it has become a hobby. You can weave a lot of beautiful and useful things from multi-colored rubber bands: bracelets, phone cases, funny animals, wallets, key rings and even clothing items. Weaving lovers exchange patterns, create magnificent collections of crafts. Rubber band weaving is such an exciting activity that some even call it a craze.
weaving craft
Weaving from rubber bands has become so widespread because to start classes it is not necessary to purchase expensive equipment, attend circles in order to master the basics of the craft. Knowledge is available for beginners of any level, be it a child or an adult. It is enough just to purchase a set of colored rubber bands, and there are many ways to weave. You can simply weave on your fingers, a slingshot, an ordinary fork, pencils, a hook or a weaving machine.
Rubber bands are sold in different sets.: a large assorted set that mixes all the colors of the rainbow, solid and striped sets, sets of rubber bands different thickness and densities twisted like a figure eight and embossed, and even glowing in the dark.
Both children and adults are fond of weaving, the activity has become international. Weaving from rubber bands in all countries, this contributes to the emergence of new schemes, instructions and technologies. But the scope for imagination in weaving rubber bands is limitless.
Easy crafts for beginners
For those who are just getting acquainted with weaving from elastic bands, the most simple circuits and instructions. It is recommended to start learning with weaving bracelets. When creating the first masterpieces, you can do without a special machine. It will come in handy later for more complex weaving patterns. The simplest and at the same time the most diverse in style and colors crafts can be called a bracelet made of rubber bands. It has become somewhat of a cult item. Baubles are given to friends and loved ones, they are exchanged and worn as original jewelry.
The simplest bracelet is the Fishtail. It is better to weave it in multi-colored, it will turn out bright and unique.
Weaving on the fingers
The bauble is woven very easily and quickly, even for beginners everything will work out the first time. For such a bracelet, you will need about 50 rubber bands and one lock..
- The first ring is put on the index and middle fingers, twisting the eight. The next two do not twist.
- Having removed the lower left and then the right loop, they are placed between the fingers, as in the figure.
- The next ring is put on. You need to throw loops of elastic on it, which is now the last in the row.
- During the entire process of weaving from elastic bands, three rings must be kept in sight. The lower loops are thrown over the upper one, a new ring is put on and so on until the desired size of the bracelet.
- The last two loops are thrown over a special lock.
On a weaving hook
You can quickly create a bauble self made knowing how to crochet a bracelet. This technology of weaving elastic bands is absolutely accessible for beginners. If there is no special hook, then you can use a regular hook number 3 for knitting.
- Twist the first elastic band with a figure eight, pinch its twisted part between your fingers so that the free loops look up.
- Insert the hook into the loops, stretch them a new ring, placing it in the middle of the double ring from the first elastic band.
- Squeeze the second ring with your fingers so that it folds in half, forming a vicious circle. You need to stretch the third ring of rubber band into it, acting in the same way as pulling the second one.
Repeat the manipulations until the chain is the desired size. The last ring is fixed with a plastic lock. If you use rubber bands in two contrasting colors, the rubber bracelet will turn out to be colorful and original.
The technology is very similar to weaving on fingers, only instead of fingers we use a special slingshot. The slingshot is a kind of classic in the technology of weaving rubber bands.
- Put the first wheel on the slingshot, twisting it with a figure eight. Put on the next two without twisting.
- The loops of the very first, twisted ring, with the help of a hook, are thrown to the center of the column. To do this, they need to be removed from the slingshot, passing through two rings.
- Put on the fourth ring. With the lower elastic band, do the same as with the first one, remove it from the slingshot, stretching it through the third and fourth rings.
- Weave until you get a chain of the desired length. The last ring is fixed with a lock.
- The lock is inserted into the center of the column, then fixes the ends of the last gum. The outermost ring must be cut off.
The fork can also act as a machine. Although weaving from rubber bands on forks is a little more complicated than the two previous methods, anyone can also master it.
- Start traditionally with three rings. The first ring is thrown with a figure of eight, first on the 3 left prongs of the fork, and after twisting - on the 3 right ones.
- The second ring clings only to the two extreme teeth. The third is similar to the second.
- The left loop of the first ring is removed from the fork, threading it between the middle rows. The right loop is removed in the same way.
- The next ring is thrown in the same way as the second and third, that is, only on the two extreme teeth of the fork.
- The last ring is removed from the fork in the same way as in the previous stage, its left and right loops are alternately threaded between the middle rows.
- When there is no space left on the fork, you need to remove the hinged loops. To do this, you need to insert the hook into the two extreme loops and carefully remove the entire fishtail from the plug.
- Only two extreme loops are thrown onto the fork, for which the tail was removed and weaving continues.
- The edges of the finished fishtail bracelet are fastened with a lock.
Weaving on a loom is not as difficult as it might seem at first. If you can weave on your fingers or a slingshot almost on a whim, then weaving on a loom almost always requires a clear instruction.
- The first elastic band is put on the left extreme and middle extreme row of the machine.
- The second, of a different color, on the leftmost row over the one already thrown over and on the second column of the middle row.
- Zigzag fill the entire leftmost and middle row of the machine with rings, observing the color algorithm.
- To continue working, the machine must be positioned so that the horseshoes of the columns are located with an open part to the master.
- The first loop of the middle row is thrown onto the second column of the left row of the machine.
- In the same way, you need to transfer all the loops of the middle row to the left row.
- Having finished throwing the loops, fix the extreme elastic bands at the beginning and at the end of the rows with a special s-shaped clip.
- All elastic bands are removed from the machine with a hook. When the necessary skill appears, weaving gum bracelets will become an easy and exciting process.
Weaving bracelets from rubber bands is perhaps the most popular direction in this diverse hobby. Many models of bracelets were invented, narrow and wide, voluminous and flat, decorated with rhinestones and beads.
- If it becomes necessary to interrupt the weaving on the fingers, then you can throw the loops on pencils or a fork.
- Instead of a lock, you can use an elastic band, she just needs to tie the two ends of the bracelet.
Bracelet Pavement
This is a very popular bracelet model. Having learned how to weave it, you can create a unique decoration for yourself and please your beloved friends with a gift.
If there is nothing at hand, but you really want to weave a bracelet, you can use simple pencils. It will take only two pencils, fastened together with adhesive tape for convenience. An eraser can serve as a gasket between them.
- A double crossed rubber band is thrown over the pencils. In the future, all rubber bands are used in pairs.
- The next pair is thrown over without crossing. The two lower rubber bands are thrown off in the middle of the future chain.
- The next pair of rings is thrown on, and the two lower elastic bands are again moved to the center of the chain. This is repeated until the desired length of the craft is reached.
- At the end of the work, all the lower loops, except for the last rubber band, are dropped from the pencils. The bracelet is fastened by the loops of the last ring connected to each other.
On a special slingshot
Weaving using the technique Pavement on a slingshot is more convenient than on pencils. But the general technology of throwing remains practically unchanged.
- You will also have to work with pairs of rubber bands. The first pair is thrown onto the slingshot with a figure eight.
- The next pair is put on evenly, without kinks.
- The loop is removed from any edge of the slingshot and placed in the center of the column. There are two loops at one end of the slingshot, and one at the other.
- A pair of a different color is put on. Through it, a couple of loops are thrown into the center of the braid from that edge of the slingshot, on which there were 3 of them.
- Continue to weave according to the scheme until you get the crafts of the required size.
- To close the loops, all rows, except for the last gum, are removed. The latter is thrown to one end of the slingshot and fixed with a lock, the second part of which closes the bracelet in a circle.
You can even weave on your fingers
Finger weaving technique is perfect for this simple instruction. The thumb and index or middle fingers are usually used as columns..
- The first row is a pair of eight-shaped elastic bands. The second row is a pair of ordinary ones.
- The lower loop is removed from one finger and placed on the center of the column.
- A third pair is put on, after which a loop is thrown off the center from the finger on which there are 3 of them.
- The scheme is applied until a bracelet of the desired length is obtained.
- The accessory is fixed according to the standard system. The clasp is attached to two loops obtained from the last rubber band.
Needlework on forks
The volume of the bracelet can be emphasized by the colors of the rings. Looks great, for example, a white and blue accessory.
- A double eight-shaped elastic band is put on the middle teeth of the fork.
- The next two pairs of twisted rings are put on 1-2 and 3-4 pegs of the fork.
- The two lower loops, located on the middle teeth, are thrown up to the teeth of the same row.
- The rubber bands are put on the middle pegs in pairs, but without twisting.
- The lower loops are thrown off from the central cloves.
- Similarly, rubber bands are thrown over 1-2 and 3-4 teeth of the fork.
- According to this instruction, continue to throw on and remove the loops from the fork.
- To close the loops, we throw them from the side to the central teeth.
- The last ring is placed on top and all the lower layers are removed through it.
- A hook is threaded into the remaining loop for fastening.
On a big machine
The bracelet is woven on two rows of the loom: middle and outer. A bracelet woven from elastic bands of two contrasting colors looks harmoniously..
- The screwed double elastic is thrown over the first two columns of the extreme and middle rows.
- The second double elastic band is thrown in the same place, but without twisting.
- Crochet the bottom pair and throw it on the central part of the top pair.
- The third pair of the same color as the first is pulled over the posts.
- Weaving continues, periodically removing loops to the center from the column on which there are more of them.
- The steps are systematically repeated until the desired length of the decoration is reached.
- The last elastic band is folded into a loop and secured with a lock.
There are a huge number of schemes and instructions on how to weave bracelets from rubber bands. Using the example of weaving the Pavement bracelet, you can see that when weaving on the fingers and on the loom, exactly the same jewelry is obtained. You can weave rubber bands on anything: on fingers, a fork, pencils. Although, of course, the presence of a slingshot and a loom can greatly facilitate the process of weaving and expand the boundaries of fantasy.
Rubber bracelets
"Bay leaf" is an unusual bracelet. Dense, voluminous weaving, excellent pattern and at the same time - ease of execution. In order to repeat the "bay leaf", the machines will not be needed: a hook, one fastener and elastic bands - that's all you need. In the photo above, the "bay leaf" is presented in the company.
To crochet a Bay Leaf bracelet, you will need:
elastic bands of two or three colors;
two hooks (one is possible, but it will be less convenient);
one clasp.
How to crochet rubber band bracelets: job description
We throw the first rubber band on the hook with a figure eight. Now we will weave with elastic bands of only one color.
We put the second elastic band on the hook and stretch it through both loops already on the hook. The loop remaining from the new gum is also thrown onto the hook.
You can immediately put on a fastener on the first rubber band.
We put an elastic band on the hook and stretch it only through the first loop on the hook.
We also throw the rest of the new rubber band on the hook. There are 3 loops on the hook in total.
We take an elastic band of the same color, we put it on the hook, we stretch it through the first of the loops on the hook and we also put the rest of the elastic band on the hook. There were 4 loops on the hook.
We take another elastic band and, in the manner described above, we stretch it through the first of the loops and also put the second tail of the elastic band on the hook. We have 5 loops on the hook.
We introduce another hook through all the loops, as shown in the photo below.
We take out the first hook, we unfold the weave.
Change the color of the rubber bands. We take an elastic band of a different color, put it on the hook and stretch it through the first of the loops on the hook. We put the second loop of elastic on the hook.
The first of the rubber bands blue color on the hook we throw it over the yellow one.
We take another yellow elastic band and stretch it through two loops on the hook: the first yellow and the second blue. We also put the end of the elastic band on the hook.
We throw the first of the blue loops so that it is located on the hook of the second in a row.
We take another yellow elastic band and stretch it through the two extreme loops, yellow and blue. We throw the tip on the hook.
We have two blue rubber bands left on the hook. We throw them over so that they are the first yellow loop from the rest.
We throw another yellow elastic band on the hook and stretch it through the last three loops: one yellow and two blue. We put the tail on the hook.
Now all the loops on the hook are yellow. We wove this fragment, it's time to change the hooks. We insert another hook, and remove the previous one.
We unfold the weave.
Now we repeat with the blue rubber bands everything the same and in the same sequence that we did with the yellow ones before. We throw a blue elastic band on the hook and stretch it through the first loop.
We throw the first yellow elastic band through the blue loop.
We stretch one more blue elastic band through two extreme loops: blue and yellow.
We throw the yellow rubber band so that it becomes the second in a row from the beginning of the hook.
Through the first two loops (blue and yellow), we stretch another blue elastic band.
Throw the two remaining yellow loops forward so that they are placed after the first blue loop.
Pull the blue elastic through the first three loops on the hook (blue and two yellow).
Again we introduce the second hook and turn the weaving over. We continue to weave a crochet bracelet from rubber bands in the same style until the fabric of the desired length is woven.
After that, we stretch the elastic band through all the loops of the completed fragment.
We fix both parts of the final elastic band with a fastener.
Bracelet "Bay leaf" is ready.
And lovers of bright and unusual jewelry will surely like it.
Eva Casio specially for the site
Rainbow Loom rubber bands have gained immense popularity in the world of needlework. They were especially loved by children. Rainbow rubber bands can be used to weave anything: jewelry, key chains, clothes for dolls and even phone cases. enough to buy necessary materials, choose the right video, master a few techniques and weaving from small and bright elastic bands on a special hook for work will be a completely easy task for beginners!
Of course, if you try your hand at this type of needlework for the first time, you don’t want to spend money on special machines, slingshots and other tools. Fortunately, weave beautiful figurines possible without them. Therefore, this article contains lessons on weaving from rubber bands on a hook.
We study detailed weaving from rubber bands on a hook for beginners
Trying to make a rainbow bracelet as a decoration for every day
Bright bracelets made of silicone rubber bands have become very popular among children and teenagers.
To weave such a bracelet, you will need:
- Metal or plastic hook;
- elastic bands of all colors of the rainbow;
- S-shaped clip.
This is a basic set of materials that can be found in any needlework store, and it will not cost much.
Let's start weaving. Take a yellow elastic band, squeeze it in the middle and put one part of the clip on it.
We put the elastic on the hook, threading its tip first into one hole, and then into another. The clip should be in the middle and hang freely.
We put 2 elastic bands of green color on the hook and place them at its end.
We stretch the green elastic bands with our finger so that they catch on the hook and remove the yellow elastic bands on them.
We put green elastic bands on the hook, as in the photo.
Now put on 2 blue elastic bands and do the same with them as with the green ones.
We repeat the same steps with elastic bands of all colors until we weave a bracelet of the length we need.
In our case, the last color used was blue. Therefore, we take 1 purple elastic band and put it on the hook.
We stretch this elastic band down and remove the blue ones on it. Then we put purple on the hook. After that, we push the loops into the free end of the clip.
Ready! We received a beautiful bracelet without a machine and a slingshot.
We create a stylish bracelet "Scandal" from rubber bands
Materials:
- hook;
- elastic bands of two colors: orange (40 pieces) and black (32 pieces);
- S-shaped clip.
Weave the bracelet first in the same way as in paragraphs 1-5 of the rainbow bracelet master class.
Now we have 4 loops on the hook, from which we need to remove the leftmost one.
Take a black elastic band, put it on a hook, stretch it and stretch the first orange loop from the hook through it.
Hold the rubber bands with your fingers as shown in the picture.
Then we put back on the hook the orange elastic band that we removed from the hook, and then the black one.
Holding all the loops with your fingers so that the bracelet does not bloom, remove them completely from the hook. Then we introduce the hook on the other side.
We put a black elastic band on the hook and remove the first 3 elastic bands on it.
And we put on the hook the black gum remaining in the hands.
We put two orange elastic bands on the hook and thread them through all the loops. After that, we introduce the hook into the orange loops remaining in the hands.
We continue to weave according to this pattern until we reach the length we need.
We analyze a master class on weaving a volumetric Owl
Thanks to the growing popularity of Rainbow Loom, a new trend in needlework has come into fashion - lumigurumi. This is the weaving of various figures from rainbow rubber bands. You can weave both small flat figures and large voluminous toys.
We suggest you try to weave a voluminous owl. Make it quite within the power and novice.
To create such an owl you need:
- 500 elastic bands in the main color, or 250 elastic bands each in two colors if you want your owl to be two-tone
- 13 white and 8 black elastic bands - for the peephole
- 9 orange rubber bands - for the beak
- toy stuffing material
- hook
It's time to replace your old silicone phone case with the original Rainbow Loom rubber case. To create such a case, you will need more time than to weave a bracelet or keychain. But on the other hand, it can be a cover with an interesting pattern, plain or multi-colored, striped or rhombic. In general, whatever you want.
You can create accessories for phones using a hook. To do this, you will need a crochet hook and rubber bands (about 110 of one color and 330 of another). In order not to be mistaken with the size, you can measure your mobile with a ruler or weave a chain, circle it around the phone and leave the required length by connecting the edges.
How to weave a phone case, see the video tutorials.
Video tutorials on the topic of the article
And here is a selection of videos about weaving a phone case and all kinds of bracelets. Happy learning!
