Combined dresses. Combined dress for a girl: how to correctly and beautifully combine elements of knitting and fabric in a product Combined crochet with fabric for a girl

Combining fabric and knitted parts in one product is now trendy. It looks lively, fashionable and interesting. Immediately the imagination draws dozens of ideas, but the one that is easy for females to implement is this dress.

Today I offer you a master class on making such a combined dress, where we will crochet the yoke and sew the skirt from fabric. It turned out, as I expected, beautiful and tender.

Chest circumference – 44-46 cm
Product length – 42 cm

To make a children's combined dress, the following materials and tools are needed:

1/3 skein yellow yarn(300 m/100g)
- leftover yarn Pink colour(300 m/100g)
- yellow fabric (80x28 cm)
- hook No. 3
- knitting needle
- sewing machine
- overlock

Required skills: be able to knit chain stitches, connecting stitches, double crochets and single crochets.

We collect a chain of 112 air loops. We connect the chain into a ring.

1 rub. - we knit a row of double crochets.
2 r. - now we knit a row of single crochets.
3 r. – repeat row 1
4 rub. – repeat row 2

5 rub. - repeat row 1
6 rub. - repeat row 2
7 rub. - repeat row 1

The front and back of the yoke are knitted the same way.

8 rub. – knit single crochets
9 rub. – we knit double crochets
10 rub. - repeat row 8
11 rub. - repeat row 9
12 rub. – repeat row 8
13 rub. – repeat row 9
14 rub. – repeat row 8
15 rub. – repeat row 9

Now you can knit the straps. To do this, count 10 loops on both sides and knit the straps with double crochets for 15 rows. We knit from the back of the yoke.

Sew the ends of the straps to the front of the product.

We knit flowers with which we will decorate the dress.


flower knitting pattern

Sew flowers on the front and back (6 pieces). To add contrast, sew on the applique with yellow thread.

We process the product with pink yarn in this pattern: * 3 double crochets, 3 air loops (knit from * to the end of the row).

wiring diagram

Now you can sew the skirt. To do this, take a fabric 80x28 cm. Fold the piece of fabric in half and sew the side seam using an overlocker. He will immediately process the cut.

We process the upper section of the skirt using an overlocker.

Gather the top edge of the skirt with thread.





The top of the dress with a yoke is knitted according to the attached pattern, which I didn’t go far for because I found it here on “Hook4ok. RU".

  • interesting selection for the site!!!
  • digest of crochet dresses for girls

The bottom of the dress is crocheted using ready-made ribbons. The dress turned out to be light, airy and, in my opinion, very beautiful. I'm sorry, the photos didn't turn out better, because the fashion model was on springs... So, let's knit a dress. We collect a chain of 112 air. loops + 3 air. lifting loops. In the first row we knit stitches with one crochet, distributing 28 tables and 14 tbsp on the front and sleeves. on 1/2 back. Next we knit according to the pattern of 15 rows. Now we process the fastener strips with 3-4 rows of st. without nac. and make holes for the buttons. Image 1-2: 16th row. We fold the planks overlapping and knit a row of them in st. with air + air loop passing one base loop at a time. In the armpit parts we add a chain of 18 air. loops

Image 3: 17th row. We knit along the entire row of st. without nac.

Image 4: 18th row. We knit st. with 3 yarn overs.

Image 5-6: After the 18th row we knit 1 row of st. without nac. For the bottom of the dress, I needed about 9 meters of finished tape, 5.5 cm wide. We pass all 9 meters of tape through an overlocker with the knife turned off. The stitch regulator is at mark 2. We give one line along the upper edge of the tape. This can also be done using a zigzag stitch on a sewing machine. We do this procedure so as not to pierce the fabric with the hook, and the distance between the punctures may not be the same.

Figure 7-8: Tape processing. We insert the hook under the overlock loops, grabbing the working thread and knitting stitches around the entire perimeter of the tape. Each time we insert the hook under the same number of overlock loops and thus we get a uniform knitting.

Fig.9: Tape connection. The tape can be connected in 2 ways. Here is 1 way: Raise 3 air. loops.

Image 10: Yarn over and knit st. with nak. in Art. without the ribbon crochet, approximately 1 cm from the edge of the ribbon.

Image 11-12-13-14: Now we yarn over and knit st. with nak. at the top of the dress, skipping st. without any reason. We continue to knit st. with nak. skipping 1 tbsp each time. without nac. grounds. You get 2 rows of fillet mesh. When finishing the connection, we cut off the tape with a margin for the side seam on the overlocker. Make sure that the seam is on the wrong side.



Fig. 15-16: We bend the work and along the row between the two rows of the formed fillet mesh we knit stitches with nak + air. loop, that is, we continue to knit the fillet mesh. We knit 6 rows.


Figure 17: Second method of connecting the tape. Apply the tape to the mesh. We make sure that the tape is on the front side and skipping 1 stitch on the tape. without nac. We further knit the mesh according to the pattern, connecting the ribbon at the same time.

Fig. 18: The side edge of the tape must be processed with an overlocker. Next, we knit 5 rows of fillet mesh between the ribbons and in each section between the ribbons we evenly add 6 cells. We connect the following ribbons to the canvas using method 2. I got 7 ribbons. Neck treatment.

Image 19: Along the top of the 1st row of the yoke. Raise 3 air. loops, skip 1 tbsp. with nak. grounds and in the 3rd Art. we knit the bases st. without nac. We continue to knit arches of 3 air along the entire row. loops

Image 20: Finishing the row, raise 10 air. loops and under the arch of 3 air. loops knit st. with 5 nak.

Image 21: 6 air. loops and under the first arch of 3 air. loops knit 2 tbsp. with 5 nak. Next *6 air. loops, 2 tbsp. with 5 nak. into the next arch of 3-tails. loops.* From * to * we repeat throughout the row. In the last arch of 3 air. We knit loops as in the 1st arch.


DRESS WITH KNITTED BODY. DESCRIPTION OF KNITTING BODY (FABRIC + HOOK)

http://grukhina.ru/iblock/schema/platja_tuniki_topiki_/platje_s_vjazanym_lifom/

At the beginning of summer, I found the topic “Silk tunic with a knitted bodice” on Osinka, looked through it from beginning to end and, inspired by the amazing works presented there, decided to stop being a “shoemaker without boots” and knit something for myself, my beloved. ..

In the farthest corner of the closet there was a summer skirt that I last wore 5 or 6 years ago. This photo was taken in June 2004:

I really liked the fabric of this skirt, but its length was clearly not designed for my short height (162 cm).
In addition, the hem was cut on the bias and at a rather large angle, so I looked like a Latin American dancer in it.

Luckily for me, there were 2 skeins of cotton yarn in the box of yarn orange color, very suitable in color to the fabric of the skirt.

Armed with a crochet hook and tailor's scissors, I decided to remake it.

To knit a bodice we will need:

70-80 gr. cotton yarn (I used YarnArt Begonia (100% cotton, 50 g. = 169 m., color 0014));
- hook No. 3;
- ready-made skirt or material for the skirt;
- matching threads for stitching.

Description of work:

1. Knit the cups of the bodice according to the pattern:

Please note that the length of the initial chain of chain stitches should be equal to the distance from the bottom of the chest to its center (I started knitting with 18 chain loops).
This pattern is universal and suitable for any breast size: the volume of the cup can be adjusted by adding/decreasing the number of double crochets at the top of each row.

After the cup of the required size is knitted, proceed to knitting the side part of the bodice, gradually reducing the number of stitches in each row. Knit the back of the bodice without changes (in my case, 14 tbsp in each row) to the middle of the back.

. Connect the two halves of the bodice at the back, knitting with connecting posts, and then tie the upper edge of the bodice according to the pattern:

3. Connect the cups at the front and tie the bottom edge of the bodice in a circle with the following pattern:

4. Sew the bodice to the skirt:
I simply raised the skirt to chest level, basted it to the knitted bodice and sewed 3-4 seams at a distance of 5-7 mm. from each other.
Then I slightly adjusted the side seams so that the dress would fit better, cut the hem to the desired length, leaving 2-3 cm for the hem, and folded it in.

5. Tie the straps: 1st row - a chain of air loops, 2nd row - double crochets in each loop.
It is very convenient to knit each row from a separate ball of thread (in one direction), since it is easier to knit the required length of the strap (tie or unravel both rows if necessary).

6.Sew the straps to the bodice: Connect the edge of the strap and the top of the cup in front, and overlap at the back (~ 3-4 cm).

To prevent the straps from stretching while wearing, you can do the following:
- pass a thread of the main color between the posts along the entire length of the strap, starting from the back,
- then pass the thread through the top of the cup, making literally 1 stitch,
- and move back to the back in the same way;
- pull the ends of the thread to give the strap the required length,
- cut the ends of the thread, leaving 5-7 cm, tie them in a knot and hide them at the junction of the straps and the back of the bodice.

Thus, with the help of this thread it will be possible to further adjust the length of the strap.
In addition, the strap itself becomes slightly ribbed and looks more impressive.

The dress with a knitted bodice is ready!

It is important for a girl at any age to look very beautiful and fashionable. In the modern fashion industry, a combined dress for a little or older girl is gaining popularity. In this version of sewing and knitting an elegant product, two or more types of materials should be harmoniously combined. Most often, handmade dresses combine a knitted top with a fabric hem.

In the detailed article below, we will tell readers about the process of making an unusual combined dress that is perfect for a girl.

Knitting a fashionable combined dress for a girl: detailed description and master class

We bring to the attention of our readers a visual master class on making a combined dress with your own hands. In the dress model we propose, we use crochet Yoke top and fabric hem. This version of a dress for a girl is very simple to make and even a novice needlewoman can handle it.

The pattern and knitting pattern we offer is suitable for making a dress for a girl with a chest volume of 44-46 centimeters and a total length of the product of forty-two centimeters.

Before you begin all the manipulations of making a combined dress with your own hands for a girl, you will need the following materials and tools:

  • one third of a skein of yellow yarn;
  • remains of pink yarn;
  • yellow fabric measuring eighty by twenty-eight centimeters;
  • crochet hook number three;
  • knitting needle;
  • sewing machine;
  • overlock machine.

To make the yoke of your combined baby dress you will need to know and be able to perform ordinary air loops, connecting loops, as well as double and single crochet stitches.

First you need to cast on a chain of one hundred and twelve chain stitches. Next, connect this chain of loops into a single ring.

Now start knitting the first row of your slip dress. To do this, you need to decorate it using double crochets. Move to the second row of the yoke fabric: knit a row of single crochets. To form the third and fourth row of your knitted product you need to repeat the patterns in rows one and two.

In the fifth row, form double crochets. Proceed to forming the sixth row using single crochets. In the seventh row, use single crochets to knit the fabric pattern. Now you should leave sixteen loops on both sides of your knitted fabric and then continue to knit the yoke fabric separately: the front and back parts.

The knitting pattern for the two parts of the dress yoke will be exactly the same:

  1. Knit a row using simple single crochets.
  2. Work a row using single crochet stitches.
  3. Row again using single crochets.
  4. Form single crochet columns.
  5. Use single crochets to form a row of fabric.
  6. Repeat the pattern for the fourth row of the product.
  7. Make a row using single crochets.
  8. Repeat the pattern of the second row of the canvas pattern.

Now you can knit the straps for your three-color combination dress. To do this, count ten loops on both sides and knit the straps using double crochets for fifteen rows. Knit from the back of the dress yoke. After this, sew the ends of the straps to the front of the yoke.

Finish the edges of your top piece with pink yarn.

Now you can begin the process of sewing the hem of the skirt of your dress. Take a piece of fabric measuring 80 by 28 centimeters and fold it in half. Next, using an overlock machine, sew a strong side seam. The upper section of the skirt should also be processed using an overlock stitch. Gather the upper part of the skirt with a thread and pull it off. All that remains is to firmly sew the hem to the top of the original dress.

Work the bottom edge of the yoke with yellow yarn using a crochet hook. We offer the following type of pattern: three single crochets, three air loops. The bottom of the skirt of your combination dress should also be carefully hemmed. Your combination dress is now complete!

Video on the topic of the article

We offer for viewing a small selection of thematic videos for the article. In the presented material you can see a visual demonstration of the process of making a combined dress for girls with your own hands. Enjoy watching and exploring.

Very Nice dress from Svetlana Pushkina.

Creativity you can't help but admire it. It is simply impossible to remain indifferent to her works.

Seeing her dresses, you just want to pick up a hook and create the same, or something similar, and be the most beautiful.

I saw this beautiful dress in Fashion Magazine No. 577. Black and pink are chic. I liked it very much. I think you will like it too.

In this dress model, Svetlana combines knitting with fabric. The bodice of the dress is crocheted from black yarn, and the skirt of the dress is made of thick pink silk and embroidered with beads. Super!

To work we will need:

Yarn “Romashka” (produced by the Kirov plant) black – 2 skeins

Hook No. 1.6

Thick silk wide. 1.4 m – 0.55 m (pink)

Black velvet wide. 1.4 m – 0.15 m

Beads and faceted beads

Beginning of work:

  1. According to pattern A, we knit two stripes - five stars in the border.


Scheme A

We connect these two strips into one canvas vertically

Steam.

  1. Draw a pattern (Fig. 3) in life size(or custom sizes)


rice. 1

Draw the borders of the insertion - i.e. B*B**

Right side

  1. We knit a sample according to pattern B, steam it and calculate the number of repeats of the “tick” pattern.


scheme B

  1. We fix the working thread in point A*, dial the required number of VPs for section A*B. We knit a connecting loop in point B* two VPs, secure the working thread with a connecting post at the height of the next row. We knit the V*VB section with partial knitting (this fragment compensates for the lack of a dart). Next we knit full rows up to t.G.
  2. At the height of the armholes, we divide the fabric into two parts - the front part and the back part. We knit these parts separately.
  3. We connect the shoulder seams.
  4. We fix the working thread in point A*. on section A*D we knit six repeats according to pattern A.


Scheme A

The left side is knitted in a mirror pattern.

  1. We tie the entire product around the perimeter with several rows of sc.

We knit air loops on the right backrest bar.

Sew buttons on the left back panel.

On the neckline, instead of the last row of sc, we knit scallops according to pattern B.


scheme B

Tip: you can knit the strips separately, sew them on, and then knit the entire product.

We tie the armholes with several rows of sc. In the last row, add a picot over every 5-6 sc.

We cut out the skirt (Fig. 3.) - two folds in front and back. We sew the fabric along the seam at the back, leaving 13 cm (to easily put on the dress).

We embroider the skirt with beads according to the pattern.

We sew the skirt to the bodice by hand.

We cut out a belt from velvet. We fold it lengthwise, sew it into a tube from the inside out, turn it inside out, embroider it with beads and beads.

The whole dress is ready.

Based on materials from Fashion Magazine No. 577

A crocheted black dress from Svetlana Pushkina, no less beautiful.

If you recommend my site to your friends and click on the buttons social networks, I will be very grateful to you.
Copyright © Attention! Please use the site materials with links



Did you like the article? Share with friends: